Spring Washers | Quantity Discount

Spring washers comes in an array of different sorts and sizes. Here's the 4 different types we have in stock - ready for shipment!

All types are designed to give force where there's little room.

3 wave spring washers

3 wave spring washers are used to take up axial play for instance at ball bearings or other places where limited spring travel is needed.

Go to table
Info box
Outer diameter (De): 4,65 mm - 186,06 mm
Inner diameter (Di): 3,40 mm - 144,07 mm
Unloaded length (L0): 0,58 mm - 14,61 mm
Average Force at L1 (F): 1,70 N - 1.357,50 N
Finger spring washers

Finger spring washers can be used where limited spring travel is required.

Go to table
Info box
Outer diameter (De): 15,11 mm - 51,36 mm
Inner diameter (Di): 7,92 mm - 34,52 mm
Unloaded length (L0): 2,38 mm - 3,18 mm
Average Force at L1 (F): 2,90 N - 300,00 N
Curved spring washers

Curved spring washers are used where axial clearance needs to be offset. This could be offsetting a small amount of clearance with a relatively light load. 

Go to table
Info box
Outer diameter (De): 4,00 mm - 16,00 mm
Inner diameter (Di): 1,80 mm - 10,50 mm
Thickness (t): 0,25 mm - 0,80 mm
Wavy spring washers

Wavy spring washers are used where axial clearance needs to be offset. This could be offsetting a small amount of clearance for ball bearings, flanges, washers, etc.

Go to table
Info box
Outer diameter (De): 8,00 mm - 44,00 mm
Inner diameter (Di): 3,20 mm - 25,00 mm
Thickness (t): 0,50 mm - 1,80 mm

Copyright © 2020 Sodemann Industrifjedre A/S. All rights reserved.