Curved spring washers

Tech drawing - Curved spring washers

Curved spring washers are used where axial clearance needs to be offset. This could be offsetting a small amount of clearance with a relatively light load. All dimensions have 1 "curve". Cams with 1 "curve" allow the washer to be pressed flat without the cam having reduced force as a result. It is, however, recommended that items always be sized so as to use less travel.

Shop By
Shopping Options
De - External diameter (mm)
Di - Internal diameter (mm)
h max - Maximum height (mm)
h min - Minimum height (mm)
s - Thickness (mm)

Items 1-10 of 12

Page
per page
Set Descending Direction
View prices - Add to Cart Material De
External diameter (mm)
Di
Internal diameter (mm)
h max
Maximum height (mm)
h min
Minimum height (mm)
s
Thickness (mm)
SKU Stock Tech Drawing Read More 3D CAD
Spring steel 4.00 1.80 0.90 0.45 0.25 62030 62030
Spring steel 4.50 2.20 1.00 0.50 0.30 62040 62040
Spring steel 5.00 2.50 1.00 0.50 0.30 62050 62050
Spring steel 5.50 2.80 1.10 0.55 0.30 62060 62060
Spring steel 6.00 3.20 1.30 0.65 0.40 62070 62070
Spring steel 7.00 3.70 1.40 0.70 0.40 62080 62080
Spring steel 8.00 4.30 1.60 0.80 0.50 62090 62090
Spring steel 10.00 5.30 1.80 0.90 0.50 62100 62100
Spring steel 11.00 6.40 2.20 1.10 0.50 62110 62110
Spring steel 12.00 7.40 2.40 1.00 0.50 62120 62120

Items 1-10 of 12

Page
per page
Set Descending Direction
Material

DIN 17222 - C 75 - WERKSTOFF NO. 1.0605

Surface

The 4 smallest sizes are phosphatised and oiled. The other sizes are galvanised 9-12 my.

Internet Explorer Incompatibility

This website unfortunately does not work well with Internet Explorer. We recommend using one of the following free browsers:

Copyright © 2020 Sodemann Industrifjedre A/S. All rights reserved.