End Fittings for Gas Springs
Our range of end-fittings can be used with our gas springs and M-struts. The thread on our end-fittings is a metric thread and can therefore be used for other purposes as well. Also, our selection of end-fittings usually includes stainless steel and galvanized options. We offer a few options made in plastic. We do not recommend using these under high pressure or with traction gas springs. Check the tables for more information.
Ball-joint
The ball joint is available in stainless steel (304 and 316), plastic or galvanized versions. Please note that we do not recommend using plastic fittings with traction gas springs.
Go to table
External threads: |
M4 - M10 |
Internal threads: |
M4 - M10 |
Center lengths: |
18 mm - 35 mm |
|
Ball-socket
The ball socket is available in stainless steel (304 and 316), plastic or galvanized versions. Please note that we do not recommend using plastic fittings with traction gas springs.
Go to table
Internal threads: |
M6 - M10 |
Socket sizes: |
10 mm - 16 mm |
Center lengths: |
18 mm - 35 mm |
|
Eye
The eyes come in 4 different materials: plastic, galvanized, stainless steel 304 and stainless steel 316. They are available in a wide range of dimensions/sizes. Please note that we do not recommend using plastic fittings with traction gas springs.
Go to table
Internal threads: |
M4 - M10 |
Hole sizes: |
4 mm - 12 mm |
Center lengths: |
12 mm - 43 mm |
|
Clevis
Our selection of fork brackets includes both stainless steel (304 and 316) and galvanized versions. Both types are in stock ready for shipment.
Go to table
Internal threads: |
M4 - M10 |
Mandrel diameter: |
4 mm - 10 mm |
|
Brackets - ball stud
Ball brackets are available in both galvanized and stainless steel versions. The bracket is also available with a shaft. The ball can be mounted inside, outside or in the middle of the bracket.
Go to table
Type of coupling: |
Ball |
Sizes of coupling (mm): |
10 mm - 16 mm |
|
Brackets - Mandrel
Brackets with shafts are available in both galvanized and stainless steel versions. The bracket is also available with ball studs. The bolt can be mounted inside, outside or in the middle of the bracket.
Go to table
Type of coupling: |
Mandrel, |
Sizes of mandrel: |
4 mm - 8 mm |
|
Extension
Extensions are only available in 304 stainless steel. They can be assembled in just about any length you need, if it is not included in our range.
Go to table
Internal threads: |
M6 - M10 |
External threads: |
M6 - M10 |
Lengths: |
20 mm - 80 mm |
|
Ball stud
Balls are available in galvanized or stainless steel. All sizes are in stock ready for shipment.
Go to table
External threads: |
M6 - M10 |
Ball sizes: |
10mm - 16 mm |
|