Compression springs

Compression springs for fast delivery!
All standard compression springs are stock items and are available for fast delivery. Buy your compression spring from our online shop now!

Our large selection of compression springs gives you plenty of options to choose from.

All compression springs set more or less in proportion to travel. If the springs are compressed to Ln, the spring will set itself. It will then not return to its original length, L0.
Always dimension a spring so that it delivers the desired travel and force with as little exertion as possible. This prolongs the service life of the spring. Applying maximum load to the spring will shorten its service life and cause it to become permanently distorted.

Range A & B - Music wire

Our series A & B compression springs are of the same high standard. Series A is a standard European series. Series B is a series from the USA that is originally measured in inches. We have, however, altered the measurements to mm. Together these two series constitute a broad selection of compression springs in all sizes – most of them in stock, ready for dispatch!

Go to table
Info box
Wire diameter (d): 0,15 mm - 10,00 mm
Outer diameter (De): 1,01 mm - 135,00 mm
Total length (L0): 2,00 mm - 1.080,00 mm
Maximum Force (Fn): 0,85N - 5.198,00N
Range A & B - Stainless steel

Our series A & B compression springs are of the same high standard. Series A is a standard European series. Series B is a series from the USA that is originally measured in inches. We have, however, altered the measurements to mm. Together these two series constitute a broad selection of compression springs in all sizes – most of them in stock, ready for dispatch!
Please note that stainless steel springs are generally 10% weaker than the corresponding springs in piano wire.

Go to table
Info box
Wire diameter (d): 0,15 mm - 10,00 mm
Outer diameter (De): 1,01 mm - 135,00 mm
Total length (L0): 2,00 mm - 1.080,00 mm
Maximum Force (Fn): 0,85N - 5.198,00N
Range C - Galvanized wire

This series is a narrow series we designed ourselves. These are the only springs we stock in galvanised wire. This series is also available in stainless steel wire.

Go to table
Info box
Wire diameter (d): 0,80 mm - 2,50 mm
Outer diameter (De): 9,00 mm - 20,00 mm
Total length (L0): 17,00 mm - 85,00 mm
Maximum Force (Fn): 7,4 N - 315,87 N
Range C - Stainless steel

This series is a narrow series we designed ourselves. This series is also available in a galvanised version.

Go to table
Info box
Wire diameter (d): 0,80 mm - 2,50 mm
Outer diameter (De): 9,00 mm - 20,00 mm
Total length (L0): 17,00 mm - 85,00 mm
Maximum Force (Fn): 7,4 N - 315,87 N
Range D - music wire

Series D is designed for use in testing. If you are uncertain what length you need, here you can find a spring you can cut to the desired length. We also have series D in stainless steel, which is approximately 10% weaker than the equivalent spring in piano wire. Please note that we are unable to define a maximum force, as it depends upon the length.

Go to table
Info box
Wire diameter (d): 0,40 mm - 6,00 mm
Outer diameter (De): 2,40 mm - 55,00 mm
Total length (L0): 300,00 mm - 1.000,00 mm
Range D - Stainless steel

Series D is designed for use in testing. If you are uncertain what length you need, here you can find a spring you can cut to the desired length. We also have series D in piano wire, which is approximately 10% stronger than the equivalent spring in stainless steel. Please note that we are unable to define a maximum force, as it depends upon the length.

Go to table
Info box
Wire diameter (d): 0,40 mm - 6,00 mm
Outer diameter (De): 2,40 mm - 55,00 mm
Total length (L0): 300,00 mm - 1.000,00 mm

Copyright © 2019 Sodemann Industrifjedre A/S. All rights reserved.